Changing the Wireless Settings for Netgear wn2000rpt
Changing the Wireless Settings for Netgear wn2000rpt
A Wi-Fi router
extender is a device between a base switch, or remote neighborhood (LAN)
passage, and a customer PC or gadget that is outside the flag run or obstructed
by a flag boundary. The extender functions as a remote hand-off or repeater by
getting passageway signals, which are retransmitted to the customer. Your
remote switch can't do everything, and Wi-Fi dead spots are unavoidable in many
homes. The speediest answer for remote scope hardships is to include a Wi-Fi
extender, which is a specific repeater that lifts the remote scope to those
bits of your home that your switch can't reach.
The wireless extender is the
great device that is used to boost the signal strength and the range of the
wireless network. It will give you rid of dead Wi-Fi zone and make your home
completely Wi-Fi signal active. In this post, we will talk about how you can
change the wireless settings for Netgear wn2000rpt from www.mywifiext.net setup page.
How to change the wireless settings for the Netgear wn2000rpt?
Step 1: Go to the range
extender menu by entering the https://mywifiext.net and hit on the
“Wireless settings”.
Step 2: You have to enter
the Name of the Wi-Fi device and choose the security option and hit on the
“Apply” button.
Step 3: You have
to choose the network security that you would like to set for your wireless
network.
Setting up WEP:
·
You have to open the wireless
settings under the security options section. Choose the WEP radio button.
·
Now, one has to choose the type
of systems such as Automatic, open
system, or shared key.
·
Choose the encryption settings
including WEP 64 bit encryption or 120-bit
encryption.
·
Enter the passphrase and click
on the “Generate” button.
Comments
Post a Comment